FlipDroppy laboratory dispenser for solid particles, powders, and beads
Sensoren, Geräte und Komponenten
In the laboratory, it is often necessary to measure and distribute dry particles, powders, and beads. This is usually done with scoops or measuring cups, which are challenging to use cleanly. Alternatively, this is done with mechanical devices involving moving parts, which are difficult to hermetically seal, difficult to clean, and furthermore can grind or jam.
The FlipDroppy is a transparent dispensing device for powders, irregularly shaped particles, and beads. It can be attached to the opening of screw-cap containers as an alternative storage lid, can be hermetically sealed, and involves no moving parts. The dispensing action involves tilting the container to fill an integrated measuring cup (Figure 1, B-C). The accurately-measured substance can be dispensed by twisting the entire container so that the measuring cup is upside-down, allowing the contents to fall by gravity into a new vessel (Figure 1, D-E).
The FlipDroppy can be adapted in size and shape for diverse applications in the laboratory (Figure 2).
Fig. 2, 3D-printed prototypes
|LEFT: With a 60 mL measuring cup attached to a 0.65 L vessel (here with silica gel in position C as shown in Fig. 1)||CENTER: With an adjustable 0-2 mL measuring cup attached to a 50 mL vessel (here with sharp garnet particles in position D as shown in Fig. 1)||RIGHT: FlipDroppy shown with measuring cup adapters for 0.5 mL, variable volumes, and four 4 mm steel balls (shown left to right).|
Figure 2, center:
- Accurate dispensing
- Doubles as a storage lid (hermetically sealable)
- No moving parts (long life, easy cleaning, no jamming, maintenance-free)
- Intuitive, spill-free use
- Can be made from standard materials in any size
- Can be sterilized and used in clean environments
- Suitable for mass production, including injection-molding
A patent application has been filed in 2021
- Ref.-Nr.: 0109-6297-LI (1,7 MiB)
Dr. Dieter Link
Telefon: 089 / 29 09 19-28